All products

The CF-10 for bulk or loose Radial components is capable of forming and cutting 2-, 3-, 4-, 5-, and 7-leaded Radial Components. · The CF-10 is capable of forming the following forms with the purchase of a shuttle + die / knife package for the specific part/form

GPD CF-8 Axial Component Lead Forming Machine All CF-8 Lead formers go through an extensive reconditioning process, and are fully calibrated with the OEM kit.  Each machine includes : · 1 Set of transport wheels (Small .015-.030", Medium .030"-.045", or Large .045"-.060") · 1 set of Horizontal bending die (90 degree form) - size will be based off transport wheel  · 1 Pin die for hairpin forming · New style infeeder allowing for both taped and single part loose feeding  · Foot Switch · Description  · Eliminates component body-to-lead stress · Forms axial leaded components either vertically or horizontally · Repeatability of station settings are controlled to ± .002″ (0.05 mm) · Form loose or taped axial-leaded components · Tooling change-over is quick and easy · Form components with lead diameters between 0.015″ (0.38 mm) and 0.060″ (1.52 mm) · Key Features (additional forms require die sets - available for additional cost) · Control lead protrusion below the pc board with cut-off lock-in tooling to eliminate post solder trimming. · Lock-in tooling prevents component “float” during wave solder process. · Stand-off or flush mount lock-in forms for components with lead diameter from .015″ to .060 (0.38 mm to 1.52 mm) and lead material from copper to steel. · Feed loose or taped components with the same machine. Feed from reels with standard Tape Feeder or in bulk with optional Jacobs Ladder. · Reduce setup time through repeatable station settings and GPD’s exclusive Calculator Software Package. · The CF-8 meets the most difficult standards for stress-free/nick-free forming during the forming sequence. · Standard tooling in stock. · Station adjustments available in inches or metric.

GPD’s CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. · Capabilities · Meets exacting military standards · Extremely low maintenance · Eliminates component body-to-lead stress · Forms axial leaded components either vertically or horizontally · Repeatability of station settings are controlled to ± .002″ (0.05 mm) · Form loose or taped axial-leaded components · Tooling change-over is quick and easy · Form components with lead diameters between 0.015″ (0.38 mm) and 0.060″ (1.52 mm)

GPD CF8 Lead Forming Transport wheel alignment tool · Product DescriptionPaymentShippingReturnsAbout UsLegal · GPD CF8 Lead Forming Transport wheel alignment tool · To align the pick up position to the trasport shaft this tool is mandatory. · The tool is placed on the shaft between the ttransport wheels and the pins must line up with the pick up positions. · If not the srews holding the wheels are lossened , the wheels adjusted for alignment and the wheels retightened. Payment · Pay with your credit card through PayPal. · All in state residents within our state will be charged state and/or local sales tax at the time of checkout. · Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days, the auction will be revoked and a Non-Paying Bidder alert will be filed. · Shipping · Packages are usually shipped within 48 hours of payment receipt (excluding Saturday/Sunday) · Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS, FedEx, DHL, or USPS. · International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. · Combined shipping is done at the sellers discretion. If you purchase more than one item from us, they may arrive in separate packages. · PFI of Florida: · 607 Savage ct · longwood, FL 32750 · Telephone: 4078224499 · Returns · All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. · We do our best to present accurate, detailed information about every item we sell. If you have any questions, please contact us before placing your bid. · About Us · PFI is a Florida Corporation who has been doing business since 1981 · we are available 5 days a week from 8-4 · our main phone number is 407-822-4499 · Legal · PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. PFI of Florida makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. Any warranty expressed in the listing itself superceeds these terms.  · PFI of Florida reserves the right to cancel bids on any item due to feedback. ·  Seller Name: pcbassyequip Add to Saved Sellers Powered by SellerVantage

GPD CF-15 Component Former  · Lead diameter .015" up to .060" (requires 3 transport wheel sizes - 1 set included)  · Horizontal flush mount and vertical part forming  · Volts 120  · Dimensions 18” x12“ x 14”  · Weight 92 lbs w/o packing and skid  · 1 set of dies included and one pin die for vertical forming  · 1 set of transport wheels.  · 1 machine can do it all - similar to hepco 8000-1 and Hepco 8000-1L Plus the ability to do vertical hairpin forming

Item was in use until about a year ago when outsourcing took place.  Sold as is where is - seller will load.  Buyer can inspect at facility in Longwood FL 

Hanwha HM 520 HM Multifunction Mounter- 2021  ID: 254 # DM-0444 · YOM: 2021  · 6 spindle x 2 Gantry (Piano Type) · Placement speed: 60,000 CPH (optimum) · Front and rear trolleys included with machine. 

Tape cutters  · 2 x trolleys (included)  · Key Technical Specifications Feature Specification Gantry Configuration Double Gantry with 6 Spindles per head (12 spindles total, Piano Type) Placement Speed Up to 60,000 CPH (Optimum) Placement Accuracy Chip: ±40 μm @ Cpk ≥ 1.0 IC: ±30 μm @ Cpk ≥ 1.0 Component Range Metric 0402 to □55 mm Max Component Height 15 mm Feeder Capacity 80 slots (8mm Docking Cart) PCB Thickness 0.3 mm to 4.2 mm Machine Weight Approx. 1,605 kg Dimensions (L × D × H) 890 mm × 2,370 mm × 1,930 mm

Hanwha Samsung SM482 Flexible Pick and Place  · SN:D2-0126-C2 · (2) trolley carts (1 each front and rear) are included.  · STF100S pictured is not included.    · Dimensions (mm) : 1,650(L) x 1,680(D) x 1,530(H) 

Hanwha Samsung SM482 Flexible placement Machine #D2-1386-DB · 6 Head Flex Placement machine 

Hanwha Samsung SM485P Multifunction Mounter - 2022 ID: 151 #DJ-0098 · YOM: 2022  · 4 precision Spindle head  · Front and rear trolleys included with machine.  · Can be purchased with or without STF100D Tray Feeder pictured 

Hanwha Samsung SM485P Multifunction Mounter - 2023  ID: 348 #DJ-0168 · YOM: 2023 · 4 precision Spindle head  · Front and rear trolleys included with machine. 

Hanwha SM481 Plus Pick and Place - 2017 ID: 142 SN: DF-0266 · YOM: 2017 · 10 spindle head   · Front and rear trolleys included with machine.  · Rated speed: 40,000 CPH  · Feeders not included with machine and can be purchased separately 

Hanwha SM481 Plus Pick and Place - 2018 ID: 143 SN: DF-1351 · YOM: 2018  · 10 spindle head   · Front and rear trolleys included with machine.  · Rated speed: 40,000 CPH  · Feeders not included with machine and can be purchased separately 

Hanwha Samsung SM485P Multifunction Mounter  · SN DJ-0167 · YOM: 2023 · 4 precision Spindle head  · Multifunction mounter capability for diverse PCB assembly applications · Front and rear trolleys included with machine.  · Advanced positioning accuracy for fine-pitch and complex component placement · OEM SPECS :  · Chip placement speed :   12,000 CPH optimum · Odd-form/insertion speed    4,500 CPH optimum · Chip accuracy  :  ±50 μm, Cpk ≥ 1.0 · IC accuracy  :  Approximately ±30 μm · Smallest component :   0603 metric / 0201 imperial · Standard component range :   0603 through 22 × 22 mm · Large-component capacity  :  Up to 55 × 55 mm · Long-component capacity  :  Up to 150 × 25 mm · Maximum component height :   32 mm standard · Standard PCB size  :  50 × 40 to 460 × 400 mm · Optional maximum PCB size  :  610 × 460 mm · Feeder capacity  :  Up to 120 × 8 mm feeder positions · Approximate machine size :   1,650 W × 1,690 D × 1,485 H mm · Approximate weight  :  1,600 kg

Hanwha STF-100D Direct Tray Feeder  · 267 2023 TRAY FEEDER - DIRECT HANWHA STF-100D LI-0735-C5

Hanwha XM520-F Flexible Mounter 2023 · SN: DY-00030 YOM; 2023  · 5 spindle x 2 Gantry high force, large component  · Placement speed: 32,000 CPH (optimum) · Includes with the machine 2 x Feeder trolleys

Heller 1400 MK5 S 208V # 59124-02                                                                     · • Manufactured: February 2020 · • Extremely small footprint Convection oven · • Left to Right · • Edge Rail with oiler · • Machine was designed to cure an underfill and dam-fill / glob top epoxy process. · • Machine has added ventilation Interlocks/safety mechanisms for the curing process. · • Variable blower speed control for the 3 heated zones and separate control for the cooling zone · • Designed to run at extremely slow speed for longer cure time (0-7.7 CM / M)  · Consigned, located in NC. 

Machines are currently in transit.  · Heller 1707MK3 2015 7 Zone Reflow oven - LF, 480V # 41216-02 · Left to Right · Edge Rail

Heller 1809MKIII 9 zone lead free reflow oven  · SN: 0414P3-B7A2L-803876-03 DOM: 4/2014 PFI: 110 · Edgerail and mesh · Left to Right · Voltage : 480V  100A 3 phase 50/60H 

Heller 1809MKIII 9 zone lead free reflow oven  · Directional Flow : Right to Left  · Voltage : 480V  100A (can be 60A at request)  · SN 0415P3-B7A2S201301-05 DOM: 04/215 · Computer controlled rail width · Edge rail and Mesh belt 

Immaculate Heller 1936MK5 R- L Reflow Oven - 208V · DOM: 6/2011 vintage SN: #0611N3F-BANGL-301013-05 · Heating zones:  10 top/10 bottom · Cooling zones: 3 · Power: 208/240 V 50/60Hz 3Phase  · Dimensions (Approx): 5900mm (L) x 1520mm (W) x 1600mm (H). · Weight (Net): Around 2900 kg (6380 lbs)

Heller Industries 1809EXL # 0206J2-A7A2-80957-3 · DOM: Feb 2006  · SN:  0206J2-A7A2-80957-3 · 9 Zone Heating / 2 cooling zones · Left to right · Combo Conveyor - Edge/Mesh belt · Power: 480V

Hepco Radial form and cut machine model 3000-2. Many dies available in stock for this machine. Shown with TRANSISTOR cut AND FORM die. This machine is sold with one die set of your choice.  LIST OF DIES AVAILABLE UPON REQUEST. DIES PROVIDED ARE FROM PFI INVENTORY. ALL OTHERS MUST BE ORDERED FROM HEPCO DIRECT. · HEPCO Model 3000-2 · Single-Stroke Pneumatic Operation  · with Easily Interchangeable Dies · Durable, Accurate, Maintenance Free, Simple to Use, Efficient, Versatile · Die changes in under 1 minute    · Steel base for extremely long life · Large variety of dies available · Slash labor costs over hand tool use · Precision dies to protect components during form · Virtually no operator training · Maintenance free · Special dies to customer specifications · Rapid payback      · Immediate delivery on In-Stock Dies · Streaming Video of SMT Axial Die (.wmv)  Requires Windows Media Player                    · A Single Machine to Trim and/or Form All These Components: · Capacitors, Transistors, LED's, Resistors, Connectors, SIP's, Resistors, Networks, DIP's Crystal Oscillators, · ZIP's, SOT's, Hall Cells, Power Transistors, Flat Pack, Reed Switches · Powered by eBay Turbo Lister · The free listing tool. List your items fast and easy and manage your active items.

HGTech LCD10C Laser Marker - 2021- PFI 111 #F210379 - PENDING  · DOM: 5/2021 SN: F210379