Austin American X-40 Stencil Cleaner — S/N 002-0374

Stencil / Misprint / PCB Defluxing All-in-One System

The X-Series system is designed around counter-rotating, blind-hole, high-energy spray bars. The added pressure allows the system to successfully clean:

• Fine-pitch stencils
• Low stand-off components
• Misprinted through-hole and blind assemblies
• Uncured glues and adhesives

The system is also gentle enough for frameless and foil stencils.

Independent Wash and Rinse Holding Tanks

Two independent holding tanks allow for lower water use. The final DI water rinse, if selected, displaces spent rinse water in the rinse tank throughout the rinse operation, providing higher tank and component cleanliness.

Large Process Chamber

X-40 Series Process Reservoir:
40” × 40” × 3”
(101.6 cm × 101.6 cm × 7.62 cm)

Standards and Conformance

Conforms with NFPA 70, NFPA 79, IES, NEMA 1, NFPA 13, and OSHA.

Tool Specifications

X40A Footprint:
58.5” W × 44” D × 59”–90” H
(148.59 cm W × 111.76 cm D × 149.86–228.6 cm H)

Electrical:
220 V, 60 Hz, 20 A, 3-phase

X40ATM Weight:
700 lb (318 kg)